Monoruptr® Vacuum Interrupters
Type: 1M, 2M and 3M
Voltage: 15 – 230 KV
Maximum Interrupting Current: 3000 Ampere
Number of Vacuum Bottles: 1 – 8
Description
A vacuum interruption device for use with SEECO one-way, two-way and three-way phase-over-phase switches. Provides full load or reduced voltage interruption capabilities.
Application
Common applications for single and multi bottle interrupters include:
- Load dropping
- Line dropping
- Loop splitting (parallel break)
Monoruptr® vacuum interrupters are not designed or rated for fault duty. Please contact the factory for confirmation of the appropriate interrupter configuration for your specific requirements.
Features & Benefits
- Provides arc-less switching
- Supports load management, remote switching and automatic sectionalizing schemes
- Full load interrupters provide convenience, flexibility and clarity in switching; reduces confusion about switching “rules” under various operating conditions
- Cost effective – one interrupter unit is shared by all sides of two and three-way switches
- Interrupter units are out of the main current path when not in operation and are not subject to fault currents
- Proven vacuum bottle technology with an established history of successful field service
- Environmentally friendly – dielectric medium is a silicon oil; no special handling or disposal procedures required
- Safety – no SF6 that can produce hazardous byproducts, when exposed to an arc
- Quick, simple field installation
| Line Dropping Rating | |||
| Voltage (kV) | # of Bottles | Current (A) | Approx. Line length (miles) |
| 46 & Below | 2 | 100 | 331 |
| 69 | 3 | 100 | 220 |
| 115 | 4 | 40 | 37 |
| 115 | 5 | 100 | 132 |
| 138 | 5 | 20 | 40 |
| 138 | 6 | 100 | 110 |
| 161 | 6 | 25 | 42 |
| 230 | 8 | 40 | Consult Factory |
Additional Information
* The products above have been saved in Adobe® PDF format. To view them, you'll need Adobe's Acrobat® Reader™ software, available for free download at Adobe's website.